These are safety devices designed to prevent escape of anhydrous in the event of a hitch failure. Not To Be Used As A Disconnect. Must be operated in strict accordance with manufacturer's instructions only.
Thoroughly clean and inspect coupling before use each season. Completely
replace coupling when oxidation is first seen or after 3 years from new
installation, whichever occurs first.
|1" Pioneer Breakaway Coupler w/Brkt 1/4" FPT port. Includes
Acme adaptor, bracket and bleeder valve. Bracket and coupler cannot be
purchased separately. Coupler will not fit bracket purchased before 1984.
|1-1/4" Pioneer Breakaway Coupler w/Brkt
Provides more than 15% additional flow compared to 1" coupler. Can be
adapted to 1" pipe by means of a standard 1-1/4" to 1" bushing. Order 1-1/4"
Acme adaptor separately. Includes bracket and bleeder valve. Bracket and
coupler cannot be purchased separately.
|1" Male Tip with 1-3/4" Acme end. (4510-6M)
|Acme Adaptor, 1-1/4" MPT to Acme Thread.
|Repair Kits and Parts for Breakaway Couplers
Fits over 1 3/4" Acme threads. Plastic, with chain (22-63FC).
|1"-One O-Ring -Teflon Packing
O-Ring and Teflon Packing may be purchased separately.
|Gasket for 1-3/4" Male Acme Connector. (22-71F)
|Snap Ring. Used for securing breakaway coupler into bracket.
Fits 1" and 1-1/4" couplers.
|Bracket for Breakaway Coupler U-bolt and hardware included.