STRAIGHT HITCH 21465

This hitch is designed to be used on machines that fold on center, or ones that require extra length to extend over harrows that stick out farther than pickers normally do. Mounts straight over the top and off center slightly to allow machine to fold and flex without interference with the hitch. Extensions are not normally required, but in cases like JD 1610 that have an obstruction on top behind the last frame member, will require a L shaped bracket. It will provide the second mounting place required.

(A 1610 has a rocker arm above the frame; so the only bar you can fasten to is the back bar. If a 1610 does not have harrows, use a 20206 a Frame).