DROP HITCH 20511

Can ship by UPS. Drop hitch: This is the hitch used on our 3-point applicator, and may be used as a replacement on our models or other similar equipment. Also suitable for use on tillage equipment when lower tongue position is required. U-bolts included. Specify frame size. Check to make sure bearing plate mount to frame without interference. Also make sure there is enough clearance for the brace.

20511 BOM

  • 10724 7/8" x 1/2" bolt
  • 10725 7/8" nut
  • 10733 spring
  • 10734 2 each 7/16 flat washer
  • 10735 2 each 7/16 nut
  • 10789 1/2" nut
  • 20211 U-bolt assy. 4x6
  • 30720 tongue
  • 30741 flapper tongue
  • 30742 latch handle
  • 31546 hitch weldment

    • 31546 Hitch weldment BOM

  • 10564 Right side Rail
  • 10565 Left side Rail
  • 10580 2 each bearing plate
  • 10728 tongue socket
  • 10732 7/16"x 3" bolt
  • 10782 brace
  • 15306 3/8" x 2" susset
  • 15307 3/8" x 3" susset

    • SALES NOTES: The tongue slides out 8" for easy hookup. A side to side tongue can be found on Hitch part # 24935. Note: On tall tillage tools like rippers that drop way down the 13 1/2" drop would let the hitch pin get into the dirt, measure for this with the tool in the ground.