Used for cold-flo applications, double 1/2" tubes are both open ended to help keep from building back pressure. Second tube is hardfaced for extended wear.

35129 BOM

• 10180 2 each 1/2" tube open end
• 11788 tube protector
• 12277 DS 151 shank
• 16699 #15 wear point

35132 BOM

• 10180 2 each 1/2 tube open end
• 11788 tube protector
• 10465 DS 150 shank
• 16699 # 15 wear point

35130 BOM

• 10180 2 each 1/2" tube open end
• 11788 tube protector
• 12305 DS A1 shank
• 16699 #15 wear point

SALES NOTE: Caution when lbs of N per hour exceeds 250, you will need to go to a larger (3/4") vapor tube. At higher rates pressure will back up in the 1/2" tube resulting in less NH3 conversion to liquid. When used properly cold-flo greatly enhances sealing. Also it will increase amount of NH3 that can be applied in cold weather slightly.