Provides the optimum placement of NH3 and liquid. Designed for dual applications of Anhydrous and liquid fertilizer. The liquid tube is spaced back and turned away from the NH3 tube to keep the fert. seperate and to keep the liquid from gelling. If the two products get together they will block the tube and turn hard as a rock. Hot water is the only way to unplug them.

33811 BOM

• 10174 NH3 tube 1/8" x 12" with a 3/16" hole
• 11033 Liquid tube 1/8" x 12" open-hardfaced
• 11788 tube protector
• 12277 DS 151 Shank
• 13094 6 each spaces 1/4" x 3/8"
• 16699 #15 point

35458 BOM

• 10174 NH3 tube 1/8" x 12" with a 3/16" hole
• 11033 liquid tube 1/8" x 12" open-hardfaced
• 11788 Tube protector
• 10465 DS 150 Shank
• 13094 6 each spacer 1/4" x 3/8"
• 16699 #15 wear point

33812 BOM

• 10174 NH3 tube 1/8" x 12" with a 3/16" hole
• 11033 liquid tube 1/8" x 12" open
• 11788 tube protector
• 12305 DS A1 shank
• 13094 6 each spacer 1/4" x 3/8"
• 16699 #15 point

SALES NOTES: Breaking up or turning could cause liquid tubes to plug. Also machine must be moving forward before dropping knives to keep dirt from being forced up into liquid tube. Applicators need to raise knives up straight to keep liquid from running into NH3 tube. Drip tube protector part # 16616 can be added to help stop plugging from the last two conditions.